https://www.leadingpacking.com
https://www.chinacoalintl.com/
Introduction of GW 50B Rebar Bender with CE
1. GW 50B Rebar Bender with CE adopt 10mm thicken top plate and high rigidity disk of iron, more durable.
2. Equipped with international standard copper motor.
3. Equipped with ultra-high hardness accessory and adjustable fender.
4. Equipped with stop switch, the machine can stop immediately,ensure the safety of the workers.
5. Adopt 16mm thick top plate,high rigidity disk,adjustable stylobate,the bending angle of more efficient.
6. Equipped with international standard copper wire brake motor, narrowing inertance when the machine stops and bending angle is more accurate.
7. Pin-type positioning disk,it can adjust angle from 0-360 degree, more easy and convenient.
Parameter of GW 50B Rebar Bender with CE
Model
|
GW50B
|
1. Bending round steel diameter
|
6-50mm
|
2.Grade thread screw steel diameter
|
6-42mm
|
3. Working plate diameter spec
|
320mm
|
4. Main shaft speed
|
8-15r/min
|
5. Motor spec
|
4KW/380V
|
6. Motor speed
|
1440t/min
|
7. Dimension
|
1060× 850× 730mm
|
8. Net weight/Gross weight
|
360kgs/380kgs
|
9. packing size
|
1100× 900× 900mm
|
Pictures of GW 50B Rebar Bender with CE
没有评论:
发表评论